Brake Bleed Kit for Shimano, TEKTRO, TRP Hydraulic Disc Brakes. Bicycle

13 reviews for Brake Bleed Kit for Shimano, TEKTRO, TRP Hydraulic Disc Brakes. Bicycle

1. 

   Steve – 12 December 2024

   Exactly what I needed for my Shimano Ultegra Di2 bleed
   I got this kit to bleed my 8150 Ultegra Di2 setup. It was very easy to use, included all the appropriate adapters/cup/syringe and enough fluid to do both front and back bleeds with fluid to spare. Levers feel fantastic again! Highly recommend watching some youtube videos on shimano bleeds to make sure that you understand the process prior to starting. Once you think you have a grasp of what is involved you can take bleeds into your own hands and learn/save on having the shop do it. Much easier to bleed than SRAM systems that have dot fluid.

2. 

   chris m – 12 December 2024

   Excellent buy
   Works perfectly for my Tektro Ebike brakes and my Shimano SLX 4 piston. There are plenty of various threaded adapters. This makes it look silly to spend over $100 on Park Tools kit.

3. 

   Norm – 12 December 2024

   Works
   Works well but the syringes feel a little cheap

4. 

   Windwolfess – 12 December 2024

   Very complete variety of accessories for hydraulic disc brakes
   I needed to replace the discs on my mountain bike brakes. Having never done so before (I always had conventional caliper brakes in the past), I wasn’t sure if I could do it, but to my great joy and surprise, the various components in the kit made it easy and successful! The fact that everything fits in a nice compact case is an added bonus. The kit provides items for different, common types of hydraulic brakes, so it can be widely used for most hydraulic brakes.

5. 

   Mike R – 12 December 2024

   Almost every bike has a spongy brake, get this
   I swear I never felt I needed to bleed my brakes. Until I did it one day on one of my bikes, just as general maintenance. Then I realized just how SOFT , All my bike’s brakes were.This did the trick and it’s cheap for such a WIDE range of fittings.Really easy to use. Perfect storage tote too

6. 

   5280 – 12 December 2024

   Worked on our Tektro brakes.
   I bought this kit for a lever bleed on our e-bikes. It came with many pieces so I imagine it will work for several applications. The case provided isn’t really suited to keep things organized. I ended up using ziplock bags to keep the small parts together. The parts I needed for the lever bleed worked fine, fit perfectly and seemed to be good quality. It is a good value for the money. Even if you were only to use it once it would still pay for itself. I would recommend.

7. 

   Gordon Clawson – 12 December 2024

   Will Work For You
   Used CHUMXINY Brake Bleed Kit for bleed of Specialized Levo Turbo EBike discs (Shimano SLX) during disc pad replacement. Comes in nice, locking plastic case, well-stocked with (almost) everything you need. Plenty of mineral oil, even allowing for rookie mistakes. Redundant TWO complete syringes, fittings, tubing for future use. More than a dozen quality brass adaptors to fit YOUR BIKE’s system. 7,8-mm wrench turned out to be invaluable. The clever hanging Bleed Bottle came scattered in three parts, went unmentioned in the (minimalist) manual, and defied an experienced cyclist until assembled (duh-picture #4) as shown. After successfully bleeding front and back, briefly disconcerted to read “Please Select The CORRECT Brake Oil Before Filling.” Reading up on DOT vs. Mineral oil use in hydraulic brakes, and DESTRUCTIVE properties of the incorrect fluid, turns out THIS IS correct for Shimano. Reviewing You Tube is a MUST before proceeding, several different authoritative tutorials, from very simple to insanely complicated (ParkTools) Would have gladly given this 5 stars if kit included inexpensive, plastic lock to clamp tubing onto fill nipple at caliper end (final two pictures). Saw it with great envy in Shimano tutorial. Kit has EVERYTHING ELSE, why not that? Twisting the nut at the nipple 1/2 turn to open the lower end of the brake line (using one wrench hand, one syringe hand, and MY THIRD HAND on the tubing/nipple connection) can, AND DOES, just as easily twist the oil-filled press-fit plastic tubing off the nipple, with resultant flow to the floor.

8. 

   Glenn Phillips – 12 December 2024

   Easy to use
   Got this to burp/bleed a new Lectric XP-3 eBike. Seems the rear brakes had some residual line-air that migrated upward. Cup adapter fit up, poured in small amount of the included mineral oil, pumped the handle multiple times, and all is good. (Needed to perform this operation twice.)Includes enough hardware and m-oil to do a complete refill if necessary.Nice kit.

9. 

   ElectroBoogie – 12 December 2024

   Was really happy with the kit, worked great with my Tektro Orion 4p brakes setup off a Trek Fuel Ex 8. I’ve never bled hydraulic brakes but equipped with the excellent Park tools video (and others) i stumbled through the procedure. Kit has everything you need to do a double plunger push – pull bleed to squeeze out the air. Fittings were good quality everything worked well and was air tight, bleed block fit well and the included tools helped make it easy. My only word of caution is the lever port requires the fitting with the shoulder and o-ring to make a good seal, the barb end one will not seal for you (at least with the tektro model i have)overall, was easy got my brakes fixed up in about half an hour. The kit has paid for itself already and i got a new bike mechanic skill under my belt.

10. 

    Pauline et Andy – 12 December 2024

    Kit complet avec des embouts en métal, tout ce qu’il faut pour faire la purge des freins sur un rockrider avec des freins decathlon par tektro.De bonne qualitée et simple à faire.

11. 

    Senna Djissenou – 12 December 2024

    Top materiaal, zeker voor de prijs

12. 

    J.A – 12 December 2024

    metal adapters = good

13. 

    ANDRÉS – 12 December 2024

    Buen producto. Me permitió purgar el sistema de freno hidráulico de mi bicicleta. El material es de una calidad razonable y lo considero una buena elección para purgados ocasionales a nivel doméstico. Es un kit muy completo con tres tipos de tacos para mantener los émbolos en su sitio y muchos tipos de conectores tanto para conectar el reservorio de liquido en la parte del manillar como la jeringuilla de purgafo en el bloque de la pinza. A mi criterio, un buen kit muy completo a un precio razonable. Tal vez, la unica pega pueda ser la mejorable traducción en las instrucciones pero atendiendo a las ilustraciones se puede deducir bien el proceso.