Price: $74.99 - $59.99
(as of Dec 09, 2024 09:00:39 UTC – Details)
AKYEN Dumbbell Rack Stand Only, Weight Rack for Dumbbells Compact A-Frame Home Gym Space Saver (480/570/800 LBS Weight Capacity, 2024 New Version)
【AKYEN】Has been a pioneer in fitness equipment for over 30 years. AKYEN Dumbbell Rack is always suitable for your home gym and meets your fitness needs while seeing your progress every moment.
【Maximum Capacity 480 LBS】This dumbbell rack uses a stable triangular design, which is made of commercial-grade steel and is at least 0.5mm thicker than others. The base is fitted with non-slip foot covers, making it extremely stable and durable. It can hold up to 480 pounds and does not wobble when taking in or taking out dumbbells.
【For 1-35 LBS Dumbbells】With a progressive slot spacing design, The dumbbell rack is suitable for 1-35 pound dumbbells, such as neoprene dumbbells, hex dumbbells, Peloton dumbbells, etc.
【NO Pinching Fingers】 The spacing of the slot has been measured, designed and modified by the designer hundreds of times, which is enough to place any small dumbbell. It comes with a slot rubber pad that won’t pinch your fingers when you take it.
【A Tidy & Safe Home Gym】Dumbbell rack 15″ L*13″ W*27.6″ H, net weight 13 pounds. This is a compact and small design that can be placed in a corner or next to a sofa to save space. A tidy and safe home gym for you.
【4 Minutes to Install】With installation tools, the dumbbell stand is easy to install and can be set up in 4 minutes. Equipped with the rubber-covered feet to prevent floor scraping and the slotted rubber to prevent dumbbell damage.
【Comprehensive After-Sales Service】 we provide a 1-month return and exchange service, and a 1-year guarantee period. If you have any questions, please contact us. PS: 480LBS Dumbbell Rack not suitable for Peloton dumbbells.
Jerry M. –
Sturdy
I was hesitant on the cheaper cost but this is really sturdy and won’t tip over. Easy to assemble and holds all my dumbells without any issues. Easily can take weights off and put back on rack. Definitely recommend
Sandra F. –
Great for Peloton weights!
I have 10lb to 30lb weights and they all fit perfectly. It was a little hard to put together as the instructions were not great, but was able to do it by myself. Probably wouldâve been easier with two people, but it was manageable with one. Other than the instructions not being great, the only other bad thing I would say is there is a really strong odor, not a good one, with the rubber pads that go on each level. Trying to figure out a way to clean them so they donât smell so bad. But it is very sturdy and what I was looking for. Definitely worth the money.
Amazon Customer –
Great product
Wow.. This is totally worth the money. Should I absolutely love it?. It definitely beats me having my weights underneath my couch. It’s heavy duty and easy to put together. It fits all of my weights perfect. If I could change anything. I would put one more row so I could put my 5 pound weights at the top. It does work out just fine. Having my 5 pounds sitting on the Very top. The test will be when my grandson comes over to see if he tries to get it off. Lol. Anyway, don’t hesitate to buy this. I think it works out perfect, and I’m very picky. If I would have thought it was cheap and not heavy duty. I definitely would assent it back..
D.G. –
Nice Weight Rack
Bought this to get rid of the clutter of dumbbells on my home gym floor. It was the best deal I found on Amazon. I ordered the 800 pound one just to be safe.PROS:- shipping was quicker than expect (two weeks).- packing was very professional and had lots of Styrofoam to protect the parts.- assembly was easy (took about an hour and half to put together and I’m a perfectionist)- no need for two people to assemble.- every single part needed was in the package. No missing parts at all.- it comes with a wrench and a hex key.- NO chemical smells or odors whatsoever. NONE. Zero. Not even the packaging.- weights sit close together for sturdiness but can easily be grabbed by their grips.MINOR ISSUES:- the assembly schematic image was very faded. However, it was readable enough so that with a little eye strain, I could understand the assembly process and parts. Only the assembly picture was faded. All other printed words and pictures were fine.- one of the mounts on the bottom base was too wide for the vertical rack to slip onto it. A couple of hits with a small rubber mallet fixed this very quickly and easily with no damage to the mount.SOME TIPS:- use a ratchet wrench in combo with the hex key to speed up assembly (duh).- don’t tighten anything until you have all the bolts and nuts in place.- tighten screws from the base up, balancing the tightening between bolts.- if a vertical rack (the part that the weights sit on) won’t slip over the bottom mount point, just hit the base mounting tabs inward with a rubber mallet a couple of times to move the metal tabs in a little and it will slip right over it.- Pay attention to the rubber pads that slip on the vertical rack. Look at the picture of the assembled rack and you can see how these are supposed to go on. They give you a couple extra too!- the vertical racks will stay up during the assembly process if you put the bottom mounting bolts on loosely with the nuts, so no need for a second person during assembly. Just in case, work from the side in case one somehow falls over.Very happy with this weight rack. It creates a much cleaner weight room and you don’t trip over dumbbells trying to get to other dumbbells.UPDATE: I have noticed one negative about the weight rack. If you try to put 45, 40, 35, 30, 25, 20 pound dumbbells on it from the bottom up, the weights in the middle will not fit on the rack. The hex dumbbells will sit on top of each other and not fit in the little slots. I had to put the 45 pounders on the floor (under the rack) and then go 40, 35, 25, 20, 15. The larger weights are too thick to fit on this rack. So, there is no way you can fit heavier weights on this rack without them just sitting on top of each other near the top of the rack.
M. Warner –
Surprisingly good quality
Didn’t really know what to expect from a product like this, especially one made in China. Bottom line: very well built, instructions simple to follow, packaging was excellent. I’m quite pleased with it. Would definitely recommend to someone looking to get their home gym organized.
CammyDavid –
No instructions included
After assembling several parts a few times, I got it put together. There are no instructions included. Aside from that, the height is great, there are rubber guards to hold the weights, and it seems sturdy.
Arthur Buck –
This rack is very stable.
I found it easy to assemble and it’s nice that they included a couple of spare parts.
Karl Merris –
Sturdy and Stable
This dumbbell rack is sturdy enough to support my weight set and very stable. Assembly was reasonably easy, although, oddly, the instructions failed to include the final step: inserting the pads in each of the rack arms, necessary to prevent damage to the weights. Very satisfied with this purchase.
Customer Y –
It was a bit expensive but the rack is rock solid. Happy with purchase
Mike –
Listing explicitly states that it works for Peloton weights but they do NOT fit, even if you stagger larger and smaller weights. Overall quality seems good though.
Bimbollo –
Excelente para tus pesas y tienes mejor espacio
Tchyna Rose –
I like this dumbell rack, it is built with good materials and I think it will age well. 6 pairs of dumbells can fit on it, although there is not a lot of space between the two top holes. For example for my 5lbs and 10lbs dumbells.I am glad it does not take much space.
Ollie –
Great quality. Great fitting for peloton tread dumbbells