Out Front Bike Handlebar Combo Mount for Garmin Edge Wahoo Elemnt Bryton

13 reviews for Out Front Bike Handlebar Combo Mount for Garmin Edge Wahoo Elemnt Bryton

1. 

   fuel98rider – 7 January 2025

   Fits the Garmin Edge 1040
   I bought a new handlebar that had an integrated mount. Unfortunately, the provided mount wasn’t big enough to support the Edge 1040. This one looked like it would be long enough, and I can confirm that it works well on the Edge 1040. The mount is long enough that I have easy access to both bottom buttons, even with gloves on. The aluminum is sturdy and does not look like it will loosen in the bar mount. Very happy with the design of the Edge mounting surface as it will hold it tight.

2. 

   matt maravas – 7 January 2025

   Good quality. Great size.
   Good quality materials. Good functionality. Good size. Good value. Definitely would buy again or recommend to a friend.

3. 

   Jon – 7 January 2025

   Works well for Garmin Edge 1050 on Cervelo ST31/ST32 (Caledonia 5)
   The long version worked perfect to fit an Edge 1050. The 1050 just barely fit at some angles with the stock Cervelo mount. Seems as well made as my stock Cervelo mount, maybe better. Not as solid feeling as the garmin round handlebar mount.Fits onto any go pro mount.Used on Cervelo ST31/ST32 stem on a Caledonia 5.Have not used the light mount so can’t speak to that (the Cervelo mount has one that is at a better angle, I think, so I have no need.

4. 

   Wllorens – 7 January 2025

   Fits BMC and Edge 1040
   I had to pry and compress the fingers but I finally was able to get this into the BMC Computer mount fitting. The short version is just barely long enough for the larger Garmin Edge 1030/40 series. Does not come with a mounting bolt. You’re on your own for that. A spare bolt from a bottle mount worked well.

5. 

   Ra̼l castillo Р7 January 2025

   Strong
   Well made and strong 💪, fits BMC Roadmachine perfectly

6. 

   Jeremy – 7 January 2025

   Broken Light Mount
   I purchased the bike computer mount with the underneath adapter for a light or camera. During my first use of the product, the light mount screw broke, rendering the mount unusable. Additionally, the mount does not hold up my Garmin computer at the proper angle; it continuously loosens and slides down no matter how tightly the master bolt is applied.I am editing this review to reflect that upon leaving my initial review, I was contacted by the Seller and given a full refund given the broken light mount.

7. 

   David – 7 January 2025

   Very streamlined very sturdy
   A few months in and this is working perfectly. It doesn’t shift. It doesn’t move and it provides a very streamlined holder for my computer and my camera.

8. 

   Amazon Customer – 7 January 2025

   Better than expected
   I was somewhat confused by “short not adapter” when first purchasing this product. Assuming that since I own a Wahoo Roam 2, I would also need to purchase an adapter/puck separately. Wrong. This mount comes with 3 adapters and each is a slightly different size. The way the mount is constructed in a “T” with 4 tapped holes, each puck can be rotated 90° to facilitate Garmin and or Wahoo computers. The 3 sizes I referred to are the wings on the back of your unit. The smallest has a death grip, difficult to remove from twist lock and the largest is much easier and smoother to operate, but doesn’t feel loose. Over all, I am very pleased with this product. Unlike the Trek Blendr mount, this doesn’t feel fragile and allows for puck rotation. Win win.

9. 

   roberto azor – 7 January 2025

   PRODOTTO CHE RISPETTA LE DESCRIZIONI

10. 

    schmidy00 – 7 January 2025

    Habe den kurzen Halter für meinen Wahoo Roam (V1) an einem BMC Roadmachine mit ICS Halter gekauft, da dieser nur für Garmin vorgesehen ist bzw nur mit labrigem Adapter verwendet werden kann.Die Gabel des Cestbon Halter ist ggü. dem originalen Halter etwas größer, wodurch er nur durch etwas Kraft angebracht montiert werden konnte. Der beiliegende Wahoo Adapter ließ sich leicht montieren und hält den Roam super fest.Der Wahoo liegt jetzt eben zum Vorbau, was wesentlich besser aussieht. Leider ist der Halter etwas lang, so dass eine ca 1,5cm grosse Lücke zum Vorbau besteht.Deshalb habe ich den Adapter nun am Rad meiner Frau verbaut (ebenfalls Roadmachine), die einen Garmin Edge1040 verwendet. Hier passt der Adapter perfekt (Bild folgt) im ggs. zum originalen Halter.Ich hätte nicht erwartet, dass der kurze Cestbon Halter für den Garmin Edge1040 ausreicht, womit sich die Frage stellt wer den langen Adapter benötigt?Auch der Gramin sitzt mit dem passenden Adapter sehr fest und solide am Rad. Die Klemmung der ICS Gabel reicht auch um das hohe Gewicht des Garmin zu halten.Somit bleibt er am Rad meiner Frau. Für mein Rad suche ich weiter nach einer kürzeren Lösung.Er ist nicht gerade günstig, aber sehr schön und wertig verarbeitet (kein billiges Druckgussteil).Der Hals wirkt etwas filgran, so dass ich gespannt bin ob er irgend wann bricht (Der Garminwird deshalb immer mit Sicherungsschlaufe gesichert)Auf alle Fälle eine schöne Verbesserung der Optik der Lenker/Vorbau Einheit!Anm.: dadurch dass das Teil direkt aus den USA kommt dauerte der Versand etwas länger.

11. 

    Gianluca Lauretti – 7 January 2025

    Ottimo

12. 

    Svend Poulsen – 7 January 2025

    works perfectly and fit perfectly to the BMC ICS2 mount

13. 

    Pierfrancesco – 7 January 2025

    Funziona perfettamente e si adatta agli attacchi per manubri integrali