PRO BIKE TOOL Bike Water Bottle Holder – Lightweight and Strong Bicycle

13 reviews for PRO BIKE TOOL Bike Water Bottle Holder – Lightweight and Strong Bicycle

1. 

   Brian Medina – 14 January 2025

   Great!!
   What can I say, it looks great and works even better! It’s easy to install and fits perfectly. It keeps the bottle sturdy throughout the whole ride. I’ve used different size bottles and they are all easy to remove from the water bottle holder. Great for the price, I definitely recommend!!

2. 

   X_HOBBES – 14 January 2025

   Can be Hacked to Sit Lower on Frame
   Some full-suspension mountain bikes don’t allow for a larger water bottle because the water cage is mounted too high (probably for clearance for the rear suspension). On my bike (Trek Fuel EX 7), there’s plenty of clearance for the suspension (even when compressed), such that the water bottle could sit lower. However, nobody seems to make a water bottle cage that sits lower. So, I found this one that has a solid back that I could drill a new mounting hole into, allowing the water bottle cage to sit about 1.5″ lower, allowing for a larger water bottle. Now, I can easily fit a 33 oz. water bottle.The material was easy to drill through (seems like some aluminum alloy). The water bottle cage comes with low-profile screws. A low-profile screw is necessary if placing it at the top of the cage as I did, so it doesn’t interfere with the water bottle. I backed the new hole with a rubber washer, since that part of the back plane doesn’t rest flush on the frame.Aside from being “hackable”, the cage seems to be well-made. The material is strong and relatively light-weight. The cage with screws weighs just 55 grams. My last cage (typical wire-frame aluminum) weighted 72 grams with screws. Unlike plastic cages, this one can be adjusted to hug the water bottle tighter (if you ride on rough terrain) or looser (if you ride road). You just need to pull the two tabs apart gently or squeeze them together to bend them a bit.Happy riding! Keep the rubber side down!

3. 

   GS216 – 14 January 2025

   Great quality and built but smaller than usual.
   This is another quality product from Pro Bike Tool, it’s made of aluminum, light weight and very sleek yet simple in design. But as others have mentioned, it’s diameter is smaller than my previous RL bottle cages by Bontrager. It will fit the old CamelBak Podium, even the Chill version BUT it’s going to be really tight that you will have a hard time pulling it out while pedaling at the same time. You can try but it might not be safe and might fall, wipe out or hit something in the process. I had to get off my bike just to get the bottle off the cage just to have a sip. I am not sure if you can try to kind of “flex” the cage a little wider to make it looser a little bit but I just left it as it is. I also have the “new” version of Podiums and they fit perfectly. Like almost any cages, it will also leave small marks or scratches on your bottle especially if they’re in there tight.

4. 

   Captain Cook – 14 January 2025

   Beautiful Bike Bottle Cage
   Previously I purchased a Pro Bike Tool tire pump for my bicycles. There are so many of these available it’s hard to know which will work best for your needs so I randomly selected this brand. It works so well that when I decided to get bottle cages I searched on Amazon and found these which are also made by Pro Bike Tool. They are precisely as described, very light weight, they have attachment fasteners included, are finished beautifully and hold my water bottles securely. I highly recommend these to anyone looking for a great quality, great looking bottle cage.I have to add a bit more. The Pro Bike tire pump I bought came with a bracket to mount it where a bottle cage would go. On my bike I have braze on mounts for the cages on the seat tube and head tube to the bottom bracket. The seat tube has a derailleur clamp between the braze ons which mandates a spacer under the cage. Well Pro Bike design engineers must have had their thinking caps on, the tire pump mount is manufactured in a way to clear the derailleur clamp and also provide the correct spacer distance for the bottle cage. I really appreciate it when there is such careful forethought in designing products and I give kudos to Pro Bike for this elegant, simple success!

5. 

   J – 14 January 2025

   Perfect water bottle cage
   Nice strong metal construction, colors as pictured and not flimsy at all. Locks my water bottle tight, especially for downhill MTB jumping.

6. 

   Volcan007 – 14 January 2025

   Very nice bottle holder
   This is exactly what I needed. It fits all of my bottles and is easily adjusted to assure a firm fit. I love it.

7. 

   haroldb – 14 January 2025

   The bottle cage holder is very tight and rigid.
   I like the color and material of item, but the opening of cage is very tight and rigid. Inserting water bottle can be a little challenging. It must be aligned exactly to opening to insert. If you are actively peddling while reinserting to you have to look away from road to ensure proper alignment or insertion could be difficult.

8. 

   Sean Lathrop – 14 January 2025

   Good Size!
   Overall the build quality on this product is perfect. The installation is super easy. The only thing for me personally is I wish it were a tad bigger – that doesn’t knock the review. Its a 5 star product but just wish it held a little bit of a larger bottle!

9. 

   Jaasiel – 14 January 2025

   Encajo muy bien en la base de mi bicicleta y tiene buena estética

10. 

    Ma del Rosario Isaias Cueva – 14 January 2025

    Me salió de muy mala calidad, luego se rompió, debí pedir uno mejor.

11. 

    Benjamin P. – 14 January 2025

    gut verarbeitet, 2 Schrauben mit dabei, nur 46 Gramm, lässt sich gut anpassen an die Flaschengröße: auch bei kleinen 0,5l Petflaschen einfach die Halterungen nach Innen biegen und schon hält auch eine kleine Flasche fest im Halter

12. 

    PONDGURU OUTDOORS – 14 January 2025

    This bottle holder is perfect for my bike.It is strong, light and holds the drinking bottle in position even when I fall off the bike multiple times during long rides off-road.I’d definitely recommend it.

13. 

    Larry Diamond – 14 January 2025

    This bottle cage is all it should be. Lightweight, robust, easy to install, and good value. It also looks good in the quality black finish and is easy to remove the bidon from, and secure in its hold of it. A good purchase. Recommended.