Shark Teeth Mouth Reflective Decals Graphics Sticker Fishing Boat Canoe Car

8 reviews for Shark Teeth Mouth Reflective Decals Graphics Sticker Fishing Boat Canoe Car

1. 

   L. Horton – 17 January 2025

   Sticks well, looks great on kayak
   I have these on two of my kayaks now. I’ve had it on a polyethylene kayak for a year and a half and it’s spent many hours in the sun on the water. Still sticks great, still looks great. I liked it so much I bought one for my newer kayak as shown in these pictures. Comes with a spare pair of eyes.It doesn’t show in the pictures but the material that this is printed on is reflective so it looks good and is very visible at night.For polyethylene kayaks (most entry and mid level kayaks) it’s important to prepare the surface and apply correctly or the sticker won’t stick. Any sticker. First clean the surface with alcohol. Household cleaners are not good, they leave a residue that will prevent good adhesion. Second best is dishwashing liquid in water, rinsed *very* well and dried thoroughly. Just before putting the sticker on, heat the plastic with a hair dryer until it’s warm to the touch. After application, press down all over the sticker, every bit of it, the harder you push the better it sticks. Especially the edges.

2. 

   SnipeHunt – 17 January 2025

   Looks great on kayak!
   I was curious after reading the negative reviews, but decided to give it a chance. Surface prep is important so I cleaned the area and then used rubbing alcohol as the final step before placing the stickers. It’s been a week and they are still adhered very well. They look great on my kayak!

3. 

   M. L. Kleinbeck – 17 January 2025

   Major Design Flaw
   This is an update and I am revising my rating to one star, only because Amazon does not allow zero stars. I thought the issues I pointed out in my original review were the only problems I would have but, even though I thoroughly cleaned the surface with fine steel wool and wiped it down with alcohol, after three days, without even making it to the water, this thing is already starting to bubble and peel. The adhesive being used was probably designed for glass or painted metal but, definitely not plastic. I have a Perception Sport Conduit kayak and it has a very smooth surface so, there is no reason for this to happen other than the wrong adhesive being used. In fact, I’m will to bet that the majority of people that gave this thing four or five stars, used additional adhesive. I wish the folks that had success with this approach would mention what adhesive they used, there are hundreds of them!Previous 3 star review:I gave this product three stars because it does look pretty cool but, there is what I consider to be a major design flaw in the product. Specifically, this thing comes in two pieces instead of one contiguous piece with backing that comes off in two pieces allowing you to apply one side, remove the other side backing and apply the other side, resulting in one seamless decal. Instead, this thing results in a seam along the curved leading edge of the kayak and, it is at this seam that I will bet is where this thing has come apart for all you folks that have reported adhesion problems. In my case the tensile strength of the decal is such that it will not adhere completely to the leading edge of the kayak leaving a little bit of the leading edge coming undone and, it is at this point that this thing is going to start coming off as the kayak knifes through the water. I can already see it.If you manufacturers read any of these reviews, here’s a suggestion for a possible relatively easy fix for this: Provide a piece of decal material in either red or black, about 1/2 X 6 inches to provide a cover strip for the leading edge seam, this may prevent water and other encountered material from pulling at the exposed edge.

4. 

   Aaron Barnes – 17 January 2025

   Looks awesome on my kayak!
   Looks great and seems like good material. My only negative is that I put it on nice and smooth and the next day it had a couple of wrinkles in it. Keep having to smooth it out, don’t know if it is heat, humidity, or both.

5. 

   dany – 17 January 2025

   Looks great 👍🏽
   Hard to keep it on the kayak. It came off few times and had to use glue to hold it together.

6. 

   Eric Sprayberry – 17 January 2025

   I’m giving it a 3 because the first one was great. The last two were damaged
   Update.. I have now ordered 4 sets of these. The first one was great. The second two came creased and after I opened the package I realized that they were not reflective. They are on some very cheap, I don’t know what to call it. In between vinyl and paper. The fourth set is exactly like the first. I want to leave 1 star, but two of them were great. Take your chance.I ordered a set of these stickers and I really liked them. Well made and the print is excellent. So I then ordered two more sets and when those two arrived, they were rolled up and that put creases in them. The first set was sent flat and worked perfectly. There isn’t a way to contact the seller. Amazon will let me return them, but I want to talk to the seller and see if they can exchange them for two different ones that would be shipped flat instead of rolled up. Pretty bummed about this. Hopefully they read this review and contact me

7. 

   marisa – 17 January 2025

   Dad loved
   Sticker quality is strong. Great size. Functional. Great color. Great value for money.

8. 

   Heard Of Me – 17 January 2025

   Good product, must apply properly.
   Fun decals. Increase the “attitude” of whatever you are applying to. I applied on a canoe. They are reflective in the event you hope someone sees you.To apply, treat the entire area with rubbing alcohol. Do not use windex as it leaves a residue that the sticker will not adhere to. Leaving the protective paper in place, place the decal on the surface in the correct position, then use masking tape to hold in place. Once satisfied with the placement, from the center, tear and remove the protective backing without allowing glue to touch surface, and using a soft flat object (small block of wood wrapped in a sock) press and apply from the center to the outer edge, then return to center and repeat for other half. Keep it dry for 48 hours.