Shimano MT200 E-Bike Hydraulic Disc Brakes Set, 2024 New Upgrade 2-Pin

8 reviews for Shimano MT200 E-Bike Hydraulic Disc Brakes Set, 2024 New Upgrade 2-Pin

1. 

   BB – 28 December 2024

   Nice Brake set
   The breaks and quality are great! They work great and are a great deal for the price. My only issue was the hydraulic lines were too short for my bike. I do ride an XL bike . I had to remove the break lines included in the kit and install new ones and bleed them out, I did not mind it was a great learning experience. Happy Biking!!

2. 

   Bryan Guthrie – 28 December 2024

   Rear cable was short.. overall an easy install.
   Rear cable was short.. overall an easy install. Works well on my sons Rad Runner -2 with a different rear cable.

3. 

   John B. – 28 December 2024

   cables slightly longer than listed
   It’s a good brake set. Note that the front cable was about 830 mm. The extra length was welcome, because I thought 800 mm would be tight.There’s an adjustment specifically for trip point of the brake signal, which was important to tune (the right vs. left levers seemed to need a very different setting).There is no hinge on the brake lever clasp, so you’ll have to remove handlebar grips, etc. The rotors are generic, so don’t expect Shimano brand.

4. 

   cody remmick – 28 December 2024

   Installed on super73 ZX
   Install was easy. Brakes were prebled. Shutoff cable fitright in. Perfect fit for the mounts with 180mm rotors. If you have a super73 zx these mount right on. No adapting needed. These are grabby brakes coming from mechanicals. Don’t wait. Make this upgrade now. Dont waste your time with the cable actuated hydraulic calipers.

5. 

   william k olson – 28 December 2024

   10 minute install
   Super easy installation. My only problem is, the assembly didn’t have the cutoff cable. 😐

6. 

   Excelente y facil de instalar! – 28 December 2024

   Seguridad
   Excelente producto, y facil de instalar.. buen frenado.. me siento seguro en mi bicicleta

7. 

   Alex Bergsma – 28 December 2024

   Great brakes!
   These are great brakes. Very nice set, They bolted right up. A friend loaned me the tool is shorten the back brake line a little bit. That went smooth. The brake cut off switch was a two wire. This didn’t work for my Bafang motor. I tried ordering a two pin to three pin connector from another company and that didn’t work. I researched online and tried using the cables and rewiring them. That didn’t work. So I just got rid of the two pin connectors and installed my own three pin Connector which had a magnet. Works like a charm now.

8. 

   Jon Siegrist – 28 December 2024

   Good upgrade
   I got an e-bike that came with cable actuated disc brakes and wanted something a little better. These have been a great upgrade. They work with the ebike 2 pin lights, and installation was super easy.Much better brake feel and stopping power.