Price: $35.99 - $22.99
(as of Dec 09, 2024 12:13:17 UTC – Details)
Enhance your smart home with the Tapo P115 Smart Wi-Fi Plug featuring energy monitoring. Gain valuable insights into your energy consumption with detailed statistics, enabling you to estimate bills and save money. Control your connected devices effortlessly using voice commands through Alexa or Google Home. The P115’s compact design fits seamlessly into your setup without blocking neighboring outlets. Upgrade to the Tapo P115 for smart control, energy efficiency, and ultimate convenience.
【Insightful Energy Tracking】Track your plug’s energy use with clear and easy-to-understand statistics and intuitive charts, helping you optimize power usage.
【Estimate Your Energy Bill】 Enhance energy management by integrating with billing systems for clear cost visualization (both single and periodic readings). Additionally, programmable scheduling allows automatic operation of high-consumption devices during off-peak hours with lower electricity rates, resulting in cost savings.
【Smart Charging for Devices】Automatically cuts power once your device reaches the low-battery limit you set, preventing overcharging.
【Surge Protection with Auto-Shutoff】Prevents electrical overload by automatically shutting off devices that use too much power.
【Voice & Remote Control】 With built-in support for both Alexa and Google Assistant, issue simple voice commands to adjust settings, turn devices on or off, or even access specific functions without lifting a finger. Manage Tapo P115 and its connected devices from anywhere with the user-friendly Tapo app.
9 reviews for TP-Link 𝗧𝗮𝗽𝗼 Smart Plug Wi-Fi Mini, Energy Monitoring, Compatible with
Add a review
Related products
High Value
Doc H –
GET THESE – For power monitoring, safety, Charge Guard, easy setup: SO WELL DESIGNED
It is rare that I see a TRULY well-designed product – software, and/or consumer electronics. But these are the rare gem: clearly well thought out, designed, and tested. SUPER easy setup (if you have the app installed and open, it will automatically prompt you to add when one is plugged in) – total of 75 seconds to setup, beginning to end INCLUDING a firmware update. (not including entering WiFi information – only needed for the first device)I originally got it just to monitor how much power devices were using (WAY cheaper than those Kill-A-Watt type meters: smaller, records history, AND remote monitoring!)But found so many more great, useful features when I started setting up the first plug:- SCHEDULE: you can set absolute times (i.e. ON at 5:03pm, OFF at 11:17pm), or RELATIVE times to Sunrise or Sunset, WITH OFFSETS – BRILLIANT! (other plugs only give you right AT Sunrise/Sunset). My living room gets dark about an hour BEFORE sunset – so I can set the ON = SUNSET-(1 Hour), OFF = 11pm, and it will adjust automatically throughout the year! Always 1 hour before sunset. No changing it with seasons, or Daylight Savings Time!! May use for low-voltage lights and Christmas lights (i.e. a little before sunset until a little before sunrise)- CHARGE GUARD (Beta): it will turn off whenever it detects the power dropping below a certain level (currently configurable 1-20 watts) for a certain period. GREAT to protect your battery, device, and HOUSE. I just set one up for my eBike charger: <20w for 10 minutes, and it shuts off when done charging. Safer, and better for the battery. Will be using them for charging my drones/quadcopters/RC stuff, drills, phones, cars, 3D Printer (ie when done printing), etc.- TIMED OFF (Auto-Off Timer): it will turn off after a set period of time, *every time you turn it on* (i.e. after pressing the power button on the plug, OR by remote)So use on things like: iron, hair curling iron, hotplate, soldering iron, EBIKE (mine is set to 10 hours), etc. This works IN ADDITION to "Charge Guard" and Power Limit.- POWER PROTECTION (LIMIT): turns off if your wattage limit is exceeded (short? failure? fire? etc.). I set my eBike charger plug to 300 watts, as it normally draws <200w.- AUTO FIRMWARE UPDATE: I'm tired of updating devices manually! And I have A LOT lol (time window configurable)- NOTIFICATIONS: I've only tested the "Charge Guard", but it sends you a notification "Charge Guard turned off Device X" - I expect similar from the other modes- Quick response: plug turns on immediately from the app (at least when I'm local) - some other devices have a few second delay- Good sized, long-term company. TP-Link has been around for years, with lots of networking equipment - so they'll be around for a while, and maintain their app - unlike the little no-name brands. This also suggests these should be well-designed for reliability and longevity.I feel much safer about charging my EBike with this (set to max 10 hours, 300w, and auto-off when the charging power drops below 20w for >10 minutes). A VERY low price for peace of mind!Oh – and I can see how much power a device is using – my original goal 🙂 Current/real-time, past (history), which days, cost (if you enter your $/kWh), etc. All nicely graphed out.Additional features I haven’t explored:”Smart Actions”, like geofencing (turn things on/off based on your location, like lights on/off when you’re home vs away)Device integration with things like leak detectors, contact switches (eg on doors), humidifiers/hygrometers, Smart Buttons, Group actions (when one device is turned on (or off), turn other device(s) on/off), cameras for motion detection
AP Sounds –
Easy setup and great energy tracking
This product was super easy to setup (use the Bluetooth setup) and the plugs were easy to rename and group. I have only had them a few days, but the energy tracking has been great and insightful already. I have already setup smart routines for the plugs and they run without any issue. I will update if anything changes, but so far these have been some of the easiest smart plugs to use. Last note, you need the Tapo app to set everything up and track energy use, but that app was a dream to work with and I was up and running in no time.
Edwin –
Works perfectly until I tried it on energy hungry applicanie!!
Would have given 5 stars until I tried one of them on my 1650W water heater for several days. One day, I got a notice saying it shuted down automatically due to overheating. I went to check what happened, then, I noticed the plug has burnt. Well, on the other side, it is smart enough to shut itself down.Don’t think it will work on these energy hungry appliances even it is rated for1800W.
TKO –
really nice and easy to use
I bought this to try out the smart plugs and I really like them. I have a bunch of air filters that I plug into these. At my area, my electric rate varies during the time of day. so I use these to turn devices off that I don’t need running during expensive time and this will save me some money. Another hack I did with this. I bought an anker Solix F2000 as a portable battery in case I lose power, but since it isn’t used most of the time, what I do is plug the battery into this smart plug, and pug my full size fridge into the battery pack. During peak hours, I turn off the power to the battery pack, this forces the battery to run the fridge, then at midnight I tell the plug to turn on, this is when the battery pack gets recharged. It’s all on a daily timer you can set for each plug. Now I don’t have a expensive battery pack doing nothing most of the year. With my rates, this device will pay for the F2000 battery back in 6 years(break even).These monitor the power consumption also. I also have one plug connected to my wifi router, I get this to power cycle the router at 4am in the morning daily. The app recognizes the dvice the moment you plug them in. its pretty amazing.
Chris Rose –
Work great, interesting to see the power consumption of common appliances, etc.
Bought these mostly to satisfy my curiosity about what uses the most electricity in the house. Going forward I will integrate more fun stuff like timers for fans, geofencing for lights etc. I was hoping they’d integrate with the Deco app. Maybe I’m wrong but it seems I need to use the Tapo app also. Not really a hardship. They also seamlessly enrolled in Google Home.
John E –
Deceptive advertising! Caveat emptor. Does not work with Alexa!
The description says “compatible with Alexa”. This is true but misleading. You have to install another app first. Then you can apparently control it with Alexa.I wouldn’t know; my phone memory is almost full and I didn’t have room for any more apps. I assumed that a product that says it works with Alexa would actually work with Alexa.Requires two apps to be installed, and this is what I was trying to avoid. This product is useless to me now as I neglected to try it during the first 30 days. That’s on me, but I’m getting really tired of this type of deceptive advertising. Buyer beware!
Nelson –
Easy to pair and works well
TP-Link Tapo Smart Plugs are easy to pair with Bluetooth. After they are paired, they work with WiFi nicely. Directly paring with WiFi is not easy.With the smart phone app, they show recorded the energy usage of the plugged in device(s). They can be scheduled to power off plugged device(s).Comparing to SONOFF S31 WiFi Smart Plug with Energy Monitoring, the Topo plugs are far easier to pair with the phone. The Govee Smart Plugs, while easy to pair, do not record the energy usage.
tank –
Easy to setup
These were pretty easy to setup with the app. After you get the first one connected and setup, the following ones are recognized right away and even faster. They work great for the Christmas tree lights and other decorations that you would want to set up a timer for. App is fairly intuitive after everything is added and you can rename and schedule each one to whatever you want.
Juan Villanueva –
He visto opiniones de que no soportan tanta potencia pero en mi caso no querÃa usarlos para equipos de alta potencia, funciona bien para cosas de uso doméstico comunes, mide el consumo, ademá tiene distintas funciones de programación y rutinas.